|
|
Manufacturing of a Segment of the Seat Positioning System
Horák, Jan ; Peterková, Eva (referee) ; Řiháček, Jan (advisor)
The bachelor's thesis is focused on the design of technology for the production of a seat positioning system made of sheet steel ČSN 11 373 with a thickness of 2 mm. Due to the adjustment of the production quantity of 200 000 pieces per year, the required dimensional accuracy and surface quality of the cutting surface is used by the technology of production of fine blanking with a pressure edge. Part of the work is the implementation of technological and construction calculations, including the design of the cutting tool with the necessary drawing documentation. An alternating arrangement of cut-outs for a coiled sheet metal blank (Ds = 1 200 mm, ds = 500 mm) is chosen as most suitable in the work, which means the use of 36 coils for a given annual production. In the final part of the work, a three-acting hydraulic press Feintool HFA 8800plus is chosen for the production of the component, which is incorporated into the automated production line FBA 6/300, including all necessary equipment for handling, unwinding and straightening the cut sheet metal strip.
|
|
|
Manufacturing of the water siphon by sheet metal forming
Toufar, Jan ; Lidmila, Zdeněk (referee) ; Jopek, Miroslav (advisor)
The thesis presents a design for the manufacturing of a foul air trap made of chromium-nickel austenitic stainless steel resistant to corrosion 1.4301. In regards to the rotationally symmetrical shape of the air trap, the most fitting technology for manufacturing was deep drawing without thinning of the side and for the preparation of the blank shearing. The selected method of drawing, results in the necessity to utilize a triple action press, which allows for the optimal connection of all selected technologies into one combined tool. All technological calculations were determined and examined. Based on these calculations, a tool was designed. In this tool, the component is assembled out of a coil in three operations of one stroke. The selected machine for production is the press Dieffenbacher PO 250.
|
|
|
Precision blanking of components
Augste, Jakub ; Samek, Radko (referee) ; Žák, Ladislav (advisor)
The project elaborated in frame of bachelor's study programme B2341–3 is submitting literary pursuit of technologies production of the fineblanking components. This thesis is concerned with a problem of the fineblanking in mass production, concretely development, principle, technological direction, tools, presses and cost-effectiveness of fineblanking. The thesis was also compared differences between conventional stamping and fineblanking. Methods suitable for small-lot production are described only marginally.
|
|
|
Manufacturing of a safety buckle by fineblanking technology
Ryza, Dominik ; Harant, Martin (referee) ; Peterková, Eva (advisor)
The goal of this diploma thesis is to design a manufacturing technology for the safety buckle. The component is made of steel 11 320. The thickness of the used metal sheet is 3 mm. For the production of the part has been chosen the technology of fine blanking process with pressure edge. This type of manufacturing guarantees the demanded high quality of this special O.E.M. It also makes possible to produce volume up to 700 000 pieces per year. The cutting tool is designed to produce three blanks per one production cycle of the machine. The manufacturing will be done on the triple-action press HFA 3200plus with a feeding line FBA 8/300.
|
|
|
The manufacturing of car latch component by fineblanking technology
Augste, Jakub ; Žák, Ladislav (referee) ; Peterková, Eva (advisor)
The project elaborated in frame of engineering studies branch Manufacturing Technology (N2307-00) is submitting design of technology production of the latch claw. The latch claw is a component of a car side-door latch assembly and can be used for different car models. The part is made of sheetmetal 4 mm thick. The material for the part is 15CrMo5, alloy steel for case-hardening purposes. Pursuant of the literary pursuit was designed several options of the part manufacture. With regard to required dimensional accuracy, cut-edge quality and expected production run (800 000 pcs. per year) was proposed manufacturing the part by fineblanking technology. Fineblanking is a cost-effective manufacturing method for accurate sheetmetal parts. For manufacturing parts was chosen Feintool hydraulic fineblanking press HFA 3200plus with total force 3200 kN. The press is coupled to a coil reel a strip straighter. Both units of Feintool feeding line FBA 8/300 are very compact, reducing space requirement. For the fineblanking tool design is used a moving-punch system because these tool systems are compact and economical to make and use. The tool make use of standardized cast iron fineblanking die set made by Fibro company. At the conclusion was compared the cost-effectiveness between two production methods – fineblanking with that of laser beam cutting.
|
|
|
The manufacturing of metal shim by fineblanking process
Uttendorfská, Magdalena ; Podaný, Kamil (referee) ; Peterková, Eva (advisor)
This master´s thesis is concerning the problem of manufacturing technology of the metal shim, which is a part of automobile brake mechanism. Shim will be made of the S460MC steel and the expected production series is 800 000 pieces per year. This quantity, demanded quality and accuracy of blank are the main reasons for application of fineblanking technology process with pressure edge. The blank will be making by triple–action press produced by Feintool, marked HFAplus4500LT. This press produces two blanks per one action.
|
|
|
Production of universal opener by fineblanking technology
Kučera, Radek ; Císařová, Michaela (referee) ; Peterková, Eva (advisor)
The aim of the thesis is to design a manufacturing technology of a part of the universal opener with an innovated design. The component is made of stainless steel 17 240 (X5CrNi18-10). The blank is 2 mm thick sheet metal. Within the literary study the comparison of the possible technologies of manufacturing has been carried out. With respect to the batch size (200 000 pieces) and to the required quality of the component the fineblanking technology has been selected. For the manufacturing of the component a triple action hydraulic press HFA 3200plus has been chosen. This press will be coupled in production line with a feeding line FBA 8/300. The main point of the thesis is to design a cutting tool and to create a drawing documentation. Another part of the project is the technical and economical evaluation of the designed manufacturing process.
|
|
|
Production form-parts by cutting
Hansen, Petra ; Štroner, Marek (referee) ; Dvořák, Milan (advisor)
The thesis elaborated in an undergraduate degree in Manufacturing Technology, proposes a technology for cutting form parts. The specified component is made from 3 mm sheet metal. The material component is structural steel EN S235JRG1. Based on the literature study, several possible methods of production parts are described. After evaluation of the required accuracy, surface quality and yearly volume of production (100 000 units / year) the technology of fine blanking has been chosen. For the production of components will be used: Triple hydraulic press, HFA 3200plus, made by Feintool. Cutting tool has been designed with moving punch, and the tool contains standardized parts. The economic comparison has been made between the methods of precision cutting, trimming and unconventional classic laser technology.
|
|
|
Design of manufacturing technology for trackpoint part
Garguláková, Lucie ; Šlais, Miroslav (referee) ; Peterková, Eva (advisor)
The disertation is focused to the technology of fineblanking. It is concerned to a production of part, which will be used as a mechanism for changing the position of seats in cars. The expected production series is 800.000 pieces per year. With reference to the quantity and demanded quality and also accuracy of blank is choosed precisely technology of fineblanking process with pressure edge. The part will be produced on triple-action press produced by Feintool AG Lyss. It is press GKP – F 160 with mechanical-hydraulic drive. This press and specialy create blanking tool produces two blanks per one action.
|
|
|
Manufacturing of a safety buckle by fineblanking technology
Ryza, Dominik ; Harant, Martin (referee) ; Peterková, Eva (advisor)
The goal of this diploma thesis is to design a manufacturing technology for the safety buckle. The component is made of steel 11 320. The thickness of the used metal sheet is 3 mm. For the production of the part has been chosen the technology of fine blanking process with pressure edge. This type of manufacturing guarantees the demanded high quality of this special O.E.M. It also makes possible to produce volume up to 700 000 pieces per year. The cutting tool is designed to produce three blanks per one production cycle of the machine. The manufacturing will be done on the triple-action press HFA 3200plus with a feeding line FBA 8/300.
|
guest ::
